GKP3 Low Frequency Vibration Sensor, Industrial Seismic Vibration Transducer for Bridge Tower Structure Monitoring

Home Products Vibration Sensor GKP3

Vibration Sensor

GKP3

Low Frequency Vibration Sensor

Triaxial MEMS vibration sensor
Resolution 1µg
Measurement range ±2g
IP67 protection rating
Output options: RS485, RS232, TTL

Product manual

Product Introduction

The GKP3 is a triaxial vibration sensor independently developed for low-frequency vibration monitoring, featuring high precision and low noise. Each product undergoes calibration and compensation across the entire temperature range and approximately 336 hours of long-term stability testing before leaving the factory, ensuring stable performance under diverse operating conditions and continuous testing cycles. The sensor supports static vibration measurement in the 0Hz or 0.1–100Hz frequency bands and integrates two output protocols, including the industry-standard MODBUS protocol. The accompanying computer analysis software enables real-time display, recording, and subsequent processing of measurement data. Output interfaces offer RS485, RS232, and TTL options.

The sensor employs a non-contact installation design, facilitating system integration. Users simply need to fix it to the surface of the object being measured with screws to automatically obtain the object's horizontal angle, making operation simple. The product possesses excellent resistance to external electromagnetic interference and shock vibration, making it suitable for applications such as satellite communication systems, vehicle handling platforms, special command vehicles, and radar antenna vehicles.

Performance Parameters

GKP3	Parameter	Unit
Measurement Range	±2	g
Bias Calibration	<1	mg
Measurement Axis	X,Y,Z	Axis
Upward/Power-Off Repeatability	<2	mg(Max)
Bias TempCoefficient	0.15	mg/℃(Type)
Resolution	1	ug
Nonlinearity	<1	% FS(Max)
Bandwidth (3dB)	0.1~100	Hz
Cross-Axis Sensitivity	1	%
Transverse Vibration Sensitivity Ratio	1	%
Noise Density	21	μg/√Hz
Resonant Frequency	2.4	kHz
Acceleration Power-On Settlement Time	1S
Output Rate	5Hz/10Hz/25Hz/35Hz/50Hz/100Hz/200Hz/500Hz
Output Interface	RS232/TTL/S485
Communication Protocol	Serial communication protocol and MODBUS RTU protocol
Input (VDD_VSS)	9~36 VDC
Operating Current Consumption	<16mA @ 12 VDC
Wiring Information	2-meter PVC black aviation plug shielded wire, weight ≤130g
Connector	Aircraft connector M12*1.0 male 5-core
Product Weight	≤450g(excluding cable)

Product Dimensions