GHA360 Ethernet High‑Frequency Vibration Sensor, Tri‑Axis MEMS Accelerometer for Predictive Maintenance

Home Products Vibration Sensor GHA360 Vibration Sensor

Vibration Sensor

GHA360

Ethernet High-frequency Vibration Sensor

Measuring range ±50g
Power supply 12V
Operating temperature: -10 ℃ to+70 ℃
IP67 protection rating
Bandwidth DC~10kHz, low noise 35µg/√Hz

Product manual

Product Introduction

GHA360 three-axis Ethernet high-frequency vibration sensor, integrated with X/Y/Z three-way transient acceleration synchronous acquisition capability, with a maximum single axis response frequency of 10 kHz, fully covering the fault characteristic frequency bands of mainstream industrial rotating machinery such as gear meshing frequency, bearing characteristic frequency, and blade passing frequency. Built in 20 bit high-resolution analog-to-digital conversion architecture, with fine sensitivity up to 0.095 mg/LSB, combining excellent linearity and the ability to pick up small vibration signals, ensuring accurate restoration of time-domain waveforms even under strong background noise.

At the network communication level, it comes standard with a 10/100Mbps adaptive Ethernet interface * *, which supports pushing raw waveform data directly to upper level servers in the form of data packets without the need for intermediate gateways or protocol conversion devices, achieving end-to-end low latency data transmission. The decentralized design concept is particularly suitable for online status monitoring and full lifecycle health quantification evaluation of key rotating components such as motors, water pumps, fans, reducers, gearboxes, etc. It can provide a high fidelity and high reliability data base for predictive maintenance.

Performance Parameters

GHA360	Parameters
Measurement Range	±50g
Sensitivity	0.095 mg/LSB
Measuring Axis	X / Y / Z Axis
Response Frequency	DC~10 kHz
Sampling Frequency	80kHz
Transient Data	Transient data of X, Y, Z axes
Communication Interface	Ethernet
Default Server Address/Port	192.168.1.169/22009
Default Device Address	192.168.1.164
Device Address	The factory default address is "1"
Operating Ambient Temp	-40℃ ~ +85℃
Installation Method	Magnetic or double-ended screw mounting (bottom hole M5*6)
Protection Rating	IP67
Dimensions	Ø23.6×H60.6mm
Product Weight	≤105g

Product Dimensions