NTS6 CANbus Tilt Sensor, CAN Bus Inclinometer for Industrial Monitoring

Home Products Tilt sensor NTS6 CAN

Inclination Sensor

NTS6

CAN Bus Output

Resolution 0.02°
Standard DC 5V power supply
CANopen/CAN2.0A/CAN2.0B outputs selectable
Measurement range ±10~±90° selectable
IP67 protection rating

Product manual

Product Introduction

The NTS6 series is a new generation of digital miniature MEMS tilt sensors developed by RUICOM Technology. It integrates a dual-channel Earth gravity tilt sensing unit, measuring static gravitational acceleration and converting it into tilt angle changes, thereby obtaining the sensor's output roll and pitch angles relative to the horizontal plane. This series supports multiple output protocols including CAN OPEN, CAN2.0A, and CAN2.0B. With the built-in MCU control system, the sensor output linearity is secondary-calibrated, effectively improving the accuracy loss caused by insufficient correction in analog products.

This product uses a non-contact measurement principle, providing real-time output of the current attitude tilt angle. It is easy to operate and does not require relocating two opposing mounting surfaces. Suitable for industrial automation control and attitude measurement scenarios, it possesses excellent resistance to external electromagnetic interference and is primarily suitable for static or slowly changing dynamic measurement environments. It is not suitable for rapidly changing dynamic conditions and can maintain long-term stable operation under harsh industrial conditions.

Performance Parameters

NTS6-C1/C2/C3	Condition	Parameter				Unit
Measurement Range		±10	±30	±60	±90	°
Measurement Axis		XY	XY	XY	XY	Axis
Resolution		0.02	0.02	0.02	0.02	°
Measurement Accuracy	@25℃	0.1	0.1	0.1	0.1	°
Zero-Point TempCoefficient	-40~85℃	±0.02	±0.02	±0.02	±0.02	°/℃
Sensitivity TempCoefficient	-40~85℃	≤150	≤150	≤150	≤150	ppm/℃
Power-On Startup Time		0.5	0.5	0.5	0.5	S
Response Frequency		20	20	20	20	s
Output Rate	5Hz/15Hz/35Hz/50HzConfigurable
Output Signal	CAN OPEN / CAN2.0A / CAN2.0B
Electromagnetic Compatibility	According toEN61000andGBT17626
Insulation Resistance	≥100 megohms
Shock Resistance	100g@11ms, triaxial (half-sine wave)
Vibration Resistance	10grms, 10~1000Hz
Waterproof Rating	IP67
Cable	Standard config: 2m shielded cable, weight ≤123g
Weight	≤112g

Product Dimensions