LTS6 CAN2.0B Low Power Tilt Sensor | MEMS Industrial Inclinometer

Home Products Tilt sensor LTS6 CAN2.0B Output

Inclination Sensor

LTS6

CAN2.0B Tilt Sensor

Six installation methods
Resolution 0.1°
Output method: CAN 2.0B
High vibration resistance >2000g

Product manual

Product Introduction

The LTS6 series is a new generation of dynamic measurement-type, small-volume MEMS tilt sensors launched by Ruicom Technology , capable of stably measuring the attitude of moving vehicles. This product incorporates a dual-channel gravity tilt unit, measuring static gravitational acceleration and converting it into tilt angle changes, thereby obtaining the sensor's output tilt and pitch angles relative to the horizontal plane. The output interface is CAN2.0B. Thanks to the built-in MCU control system, the sensor's output linearity is double-corrected, compensating for the accuracy loss caused by insufficient correction in analog products.

This product employs a non-contact measurement principle, providing real-time output of the current attitude tilt angle. It is easy to operate and eliminates the need to locate two mounting surfaces with relative changes. Suitable for both static and dynamic measurement scenarios, this product is a reliable choice for industrial automation control and platform attitude measurement. It also possesses strong resistance to external electromagnetic interference. It can operate stably for a long time in harsh industrial environments.

Performance Parameters

LTS6	Condition	Parameter	Unit
Measurement range		±90°	°
Measuring axis		Xaxis /Y	axis
Resolution		0.1	°
Static temperature	@25℃	±0.3	°
Dynamic temperature	@25℃	±0.8	°
Zero-point tempcoefficient	-40℃~85℃	±0.01	°/℃
Sensitivity tempcoefficient	-40℃~85℃	≤100	ppm /℃
Power-on startup time		1.5	S
Response frequency		0.05	S
Output signal	CAN2.0B
EMC	According to EN 61000 and GBT 17626
Insulation resistance	≥100 megohms
Impact resistance	100g@ 11 ms , triaxial ( half-sine wave )
Vibration resistance	10grms 10~1000 Hz
Protection level	IP67
Cable	Standard 2-meter shielded wire
Size	L64.5×W50×H18.5mm
Weight	≤100g (excluding cable)

Product Dimensions